Product Description
Galvanized steel is mild steel with a coating of zinc. The zinc protects the steel by providing cathodic protection to the exposed steel, so should the surface be damaged the zinc will corrode in preference to the steel. Zinc steel is one of the most widely used products, used extensively in the building sector, automotive, agricultural and other areas where the steel needs to be protected from corrosion.
Galvanized steel sheet is cut from galvanized steel coil, the base material is cold rolled steel, it has good processing performance. The zinc layer has uniform thickness, strong adhesion, no peeling during processing, and good corrosion resistance.
The surface is smooth and clean, the size is accurate, the board surface is straight, the spangles are even and beautiful.
|
Material
|
SGCC,SGCH,G350,G450,G550,DX51D,DX52D,DX53D
|
|
Thickness
|
0.12-4.0mm
|
|
Width
|
20-1250mm
|
|
Zinc coating
|
Z40-275g/m2
|
|
Hardness
|
Soft hard(60),medium hard(HRB60-85),full hard(HRB85-95)
|
|
Surface structure
|
Regular spangle, Minimum spangle, Zero spangle, Big spangle
|
|
Surface treatment
|
Chromated/Non-Chromated, Oiled/Non-oiled, Skin pass
|
|
Package
|
Covered with a layer of plastic film and cardboard,packed on
the wooden pallets/iron packing,bound with iron belt,loaded in the containers.
|
|
Price Terms
|
FOB, EXW, CIF, CFR
|
|
Payment Terms
|
30% TT for deposit,70% TT /70% LC at sight balance before shipment
|
|
Shipment time
|
7-15 working days after the receipt of 30% deposit
|
Our Advantages
WIDE APPLICATION
Generally speaking, only structural, tensile, and deep drawing galvanized sheets have tensile performance requirements. The structural galvanized sheet requires yield point, tensile strength, and elongation, etc; Only elongation is required for stretching.
Bending test is the main item to measure the process performance of thin plates, but the requirements for various galvanized sheets are not consistent in national standards. Except for structural grade, American standards do not require bending and tensile tests.
SUFFICIENT STOCK
Galvanized steel plate manufacturers have a complete range of specifications for direct sales, with a stock of 10000 tons. Various materials and standards of galvanized steel plates can also be produced according to customer requirements.
Attention to detail
Galvanized steel plate Z-normal zinc flake: Zinc flake obtained by crystallization at normal cooling rate, can be used for general purposes: X-small zinc flake: The cooling rate is specially controlled, and the size of zinc flake is smaller than that of normal zinc flake, suitable for painting and other occasions where normal zinc flake cannot meet the requirements; GZ Finish Zinc Flower: Small zinc flowers have undergone finishing treatment and are suitable for deep drawing and ultra deep drawing processing, as well as occasions with low surface roughness requirements
Detailed Photos
Application
Company Profile
Jinan Jiyang xinchengyuan iron and steel trade center is a professional steel company engaged in the research, development, production, sale and service. It had five branch companies. Our annual sales nearly one billion, about 280, 000 tons steel, It is located in Jinan with the convenient transportation access. In line with the development concept of quality conquer the world, service achievement future. We dedicate to strict quality control and thoughtful customer service, and our experienced staff members are always available to discuss your requirements and ensure every customer satisfaction. Our main products include PPGI, galvanized steel, steel plate, round bar, steel pipe, Stainless steel product, angle bar, steel pile, H beam, I beam, angle, Channel flat steel etc. With double guarantee of service and management system. Main market distributes in North America, South America, Africa, Southeast Asia as well as Oceania. We have established long-term and win-win partnership with many large steel manufacturers, such as Baosteel, Laiwu Steel, Rizhao Steel, Handan Iron and Steel, Angang and Maanshan Iron and Steel. We always foucesed on the intergration of reasources, in line with the concept of win win cooperation. Sincerely wish to build a long and regular business with you forever.
Packaging & Shipping
Standard sea packing can also be packed according to customer requirements.
FAQ
Q1: What's your terms of payment?
A: 30%T/T as the upfront deposit, 70% before delivery, We will show you the photos and package before you pay the balance.
Q2: What's the terms of delivery?
A: EXW, FOB, CFR, CIF
Q3: What's your delivery time?
A: For stocks, we could transport the goods to loading port within 7 work days after we received the deposit.
For productionperiod, it usually takes about 30 days after we received the deposit.
Q4: Could you provide the compliment samples?
A: Yes, we could provide the free samples on condition that it is available in stocks, however,the transportation fee is borne by buyer.
Q5:What product information do I need to provide?
A:You need to provide the grade, width, thickness, coating and the number of tons you need to purchase.
Q6:What are the shipping ports?
A:Under normal circumstances, we ship from Shanghai, Tianjin, Qingdao ports, you can choose other ports according to your needs.
Q7:About product prices?
A:Prices vary from period to period due to cyclical changes in the price of raw materials.
Q8:What is your working time?
A:24 hours.
Generally, we will reply to your message quickly from 7:00-22:00 Beijing time. After 22:00, we try to reply to your message within 2 hours.
Audited Supplier 
){kind=link}